In this video you'll learn how to integrate the Tricolops Dimensioning Application with USP Worldship

First we go to Advanced > Settings then scroll down and select Advanced again. Type anything inside the UPS COM PORT field.

Restart the Tricolops Application but make sure to run it as administrator. Now we just need to verify if the data changed, by going to Advanced and Advanced again. The UPS COM PORT should have a new data (COM2 in my case).

Now we can reopen the Tricolops Application as a normal user. Open the UPS Worldship too, and make sure to not close the Tricolops Application. 

Inside the UPS Wordlship  you can navigate to Tools > System Preferences > Hardware. Under Dimensioners, select the same port as we saw on Tricolops Application, select the las option of the dropdown menu "Dimensioner Type" and check Auto Mode. 

Now place a box on you scale and click Apply. You should see a screen some fields filled up in a few seconds. Click OK and OK again.  The data will be automatically updated if we change the package.

This is how you can integrate the Tricolops Application and the UPS Worldship.